frame is painted have to add some parts before I pull it out for the winter.

Looks real good Tom!
What paint did you end up using on the frame and other parts?

I used pro 15 paint.

Purdy....I started a project like this on a 78 f350 4x4...12 yrs ago..I should prolly get back to it someday

if it makes you feel any better I didn't really feel like doing this one. but it looked like the best way to get a good truck.

this is the first time I have seen this. all four wheels are the same. the shoes and backing plate look good but the wheel cylinder are shot.

Can you find them, or will you hone and rebuild the ones you have?

I frond some Dodge ones that are 1/2 a bolt hole off, with a little filling on the backing plate they worked fine as seen in the picture.

What front axle does this have?

it is a dana 60 in front and a dana 70 rear.

Nice heavy truck

it's a 1 1/4 ton at 18 feet long.

That's cool

transfer case and drive lines are in.

is that an old Dana 18 or a 205? it has the outline of a 205,but can't quite make it out,photo is blurry..W/A output shaft parking brake? a 205 PTO usually comes off the bottom plate

the Transfer case is a 2 speed, NP200, 1.91:1 low range.

got as much stainless brake line ran that I could for now.

some thing is wrong the pictures didn't show.

Tom, I feel better that my pics aren't the only ones that don't show up. Again, I reiterate, Whazzzup?

picture test

I guess I'll be able to see for myself when the pictures are able to post again but are you using stainless line or the Nickle Copper line?
Myself I'll be using the Nickle Copper.

its stainless tube comes in 6' lengths.